
b1t Counter-Strike 2 settings, crosshair and config
Natus Vincere · Support · VRS #34 World · 1,427 pts · 5 Oct 2026
Last verified
Sources: Liquipedia: player infoboxNightbot !sensDPI × sensitivityNightbot !mouseLiquipedia: Hardware tableLiquipedia: Crosshair table
Crosshair
b1t's crosshair, ready to import
The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 4px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0.
CSGO-JkLqU-Mmdap-bhqGR-934AU-VEBwOMouse & video settings
- World rank
- VRS #34
- DPI
- 400
- Sensitivity
- 1.42
- eDPI
- 568
- Resolution
- 1280×960
Match b1t's aim at your DPI
b1t's Counter-Strike 2 sensitivity of 1.42 at 400 DPI moves 73.2 cm for a full turn. Enter your DPI and the result keeps that same distance.
Enter a DPI from 50 to 32,000.
Copy b1t's setup
- Set the mouse to 400 DPI in the mouse software. Counter-Strike 2 does not change DPI.
- Set Counter-Strike 2 sensitivity to 1.42.
- The recorded eDPI for this setup is 568.
- Set the Counter-Strike 2 resolution to 1280×960.
- Import this crosshair code, which CS2 will accept: CSGO-JkLqU-Mmdap-bhqGR-934AU-VEBwO. The code on file (CSGO-TpLLK-EJ5vT-aYEpF-VphTW-k8aYO) is from before September 22, 2026, and the game rejects it.
- The verified gear on file is Logitech G Pro X Superlight, Logitech G Pro X, Zowie XL2546, Logitech G Pro X, Zowie G-SR.
Setup & cohort breakdown
b1t's Counter-Strike 2 sensitivity & eDPI analysis
400 DPI and 1.42 sensitivity. Recorded eDPI is 568. A full turn takes 73.2 cm (28.8 in). This setup run 29% slower than the 800 eDPI pro median across 1,346 tracked Counter-Strike 2 players with aim data.
b1t's Counter-Strike 2 rank
b1t is on Natus Vincere's published roster, currently #34 in Valve's official global Regional Standings (1,427 points as of 5 Oct 2026). That number is the team's standing, not a personal FACEIT level.
b1t's listed Counter-Strike 2 role is Support.
Logitech G Pro X Superlight among Counter-Strike 2 pros
376 of 1,329 tracked Counter-Strike 2 pros with a recorded mouse (28%) use the Logitech G Pro X Superlight, the most common mouse among tracked Counter-Strike 2 pros.
Common questions
- What sensitivity does b1t use in Counter-Strike 2?
- b1t uses 1.42 sensitivity at 400 DPI.
- What DPI does b1t use?
- b1t's DPI is 400.
- What is b1t's eDPI?
- b1t's eDPI is 568, which is DPI times sensitivity.
- What resolution does b1t play at?
- b1t plays at 1280×960.
- What crosshair does b1t use?
- The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 4px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0. Paste CSGO-JkLqU-Mmdap-bhqGR-934AU-VEBwO. The stored code CSGO-TpLLK-EJ5vT-aYEpF-VphTW-k8aYO is rejected.
- What mouse does b1t use?
- b1t uses the Logitech G Pro X Superlight.
- What team does b1t play for?
- b1t plays for Natus Vincere.
- What is b1t's Valve Regional Standings rank?
- b1t plays for Natus Vincere, ranked #34 in the world (1,427 VRS points as of 5 Oct 2026).
Settings export
CSGO-TpLLK-EJ5vT-aYEpF-VphTW-k8aYO// b1t (Natus Vincere) - Counter-Strike 2 autoexec// Generated by ConfigHub.gg: https://confighub.gg/cs2/b1t// Settings last updated Oct 1, 2026//// Install: save this file to Steam/steamapps/common/Counter-Strike Global Offensive/game/csgo/cfg/// Launch option: +exec b1t_autoexec// Mouse DPI: 400 (set in your mouse software, not in-game)// Resolution: 1280x960 (set in the video settings menu) // Mousesensitivity "1.42" // Crosshairapply_crosshair_code "CSGO-TpLLK-EJ5vT-aYEpF-VphTW-k8aYO" echo "[ConfigHub] b1t autoexec loaded"host_writeconfig
b1t's sens in other games
Valorant
0.446
Apex Legends
1.42
Fortnite
5.62%
Overwatch 2
4.73
Same 400 DPI, matched by cm/360. Open the converter
b1t's gear
Affiliate linksLogitech G Pro X Superlight · Logitech G Pro X · Zowie G-SR
As an Amazon Associate, ConfigHub.gg earns from qualifying purchases.
Counter-Strike 2
Valorant