Skip to content
ConfigHub.gg
Counter-Strike 2Updated

deko Counter-Strike 2 settings, crosshair and config

Aurora Gaming · AWPer, Rifler

Twitch CompareMatch setup

Crosshair

deko's crosshair, ready to import

The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 4px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0.

CSGO-rzy8K-kyDWs-VTXHM-AfYao-tANoD

Mouse & video settings

DPI
800
Sensitivity
1.2
eDPI
960
Resolution
1280×960

Match deko's aim at your DPI

deko's Counter-Strike 2 sensitivity of 1.2 at 800 DPI moves 43.3 cm for a full turn. Enter your DPI and the result keeps that same distance.

Enter a DPI from 50 to 32,000.

Copy deko's setup

  1. Set the mouse to 800 DPI in the mouse software. Counter-Strike 2 does not change DPI.
  2. Set Counter-Strike 2 sensitivity to 1.2.
  3. The recorded eDPI for this setup is 960.
  4. Set the Counter-Strike 2 resolution to 1280×960.
  5. Import this crosshair code, which CS2 will accept: CSGO-rzy8K-kyDWs-VTXHM-AfYao-tANoD. The code on file (CSGO-qYDWu-dQeyQ-chQWD-kKiFY-dyAkE) is from before September 22, 2026, and the game rejects it.
  6. The verified gear on file is Endgame Gear OP1w 4k V2, SteelSeries Apex Pro, Sony Inzone M10S, HyperX Cloud II, SteelSeries QcK Performance.

Setup & cohort breakdown

deko's Counter-Strike 2 sensitivity & eDPI analysis

800 DPI and 1.2 sensitivity. Recorded eDPI is 960. A full turn takes 43.3 cm (17.0 in). This setup run 20% faster than the 800 eDPI pro median across 1,346 tracked Counter-Strike 2 players with aim data.

Endgame Gear OP1w 4k V2 among Counter-Strike 2 pros

2 of 1,329 tracked Counter-Strike 2 pros with a recorded mouse (0%) use the Endgame Gear OP1w 4k V2.

Common questions

What sensitivity does deko use in Counter-Strike 2?
deko uses 1.2 sensitivity at 800 DPI.
What DPI does deko use?
deko's DPI is 800.
What is deko's eDPI?
deko's eDPI is 960, which is DPI times sensitivity.
What resolution does deko play at?
deko plays at 1280×960.
What crosshair does deko use?
The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 4px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0. Paste CSGO-rzy8K-kyDWs-VTXHM-AfYao-tANoD. The stored code CSGO-qYDWu-dQeyQ-chQWD-kKiFY-dyAkE is rejected.
What mouse does deko use?
deko uses the Endgame Gear OP1w 4k V2.
What team does deko play for?
deko plays for Aurora Gaming.

Settings export

.cfg
CrosshairCSGO-qYDWu-dQeyQ-chQWD-kKiFY-dyAkE
AutoexecIncludes sensitivity, crosshair and 5 viewmodel commands
// deko (Aurora Gaming) - Counter-Strike 2 autoexec// Generated by ConfigHub.gg: https://confighub.gg/cs2/deko// Settings last updated Oct 14, 2026//// Install: save this file to Steam/steamapps/common/Counter-Strike Global Offensive/game/csgo/cfg/// Launch option: +exec deko_autoexec// Mouse DPI: 800 (set in your mouse software, not in-game)// Resolution: 1280x960 (set in the video settings menu) // Mousesensitivity "1.2" // Crosshairapply_crosshair_code "CSGO-qYDWu-dQeyQ-chQWD-kKiFY-dyAkE" // Viewmodelviewmodel_fov "68"viewmodel_offset_x "2.5"viewmodel_offset_y "0"viewmodel_offset_z "-1.5"viewmodel_presetpos "2" echo "[ConfigHub] deko autoexec loaded"host_writeconfig 

deko's sens in other games

43.3 cm/360°
  • Valorant

    0.377

  • Apex Legends

    1.2

  • Fortnite

    4.75%

  • Overwatch 2

    4

Same 800 DPI, matched by cm/360. Open the converter

Verified setting history

  • DPI —→800

    Nightbot !sens
  • Sensitivity 2.71→1.2

    Nightbot !sens
  • Viewmodel —→viewmodel_fov 68; viewmodel_offset_x 2.5; viewmodel_offset_y 0; viewmodel_offset_z -1.5; viewmodel_presetpos 2

    Nightbot !viewmodel
  • Mouse Razer Viper V2 Pro→Endgame Gear OP1w 4k V2

    Nightbot !mouse
  • Monitor Zowie XL2566K→Sony INZONE M10S

    Nightbot !monitor
  • Mousepad Artisan Hayate Otsu→SteelSeries QcK Performance

    Nightbot !mousepad