Skip to content
ConfigHub.gg
Counter-Strike 2Updated

imoRR Counter-Strike 2 settings, crosshair and config

Eternal Fire · Rifler, AWPer

Twitch CompareMatch setup

Crosshair

imoRR's crosshair, ready to import

The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 3px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0.

CSGO-nf6iu-uvGc8-Gvnob-G57zr-nTyjN

Mouse & video settings

DPI
400
Sensitivity
2.2
eDPI
880
Resolution
1280×960

Match imoRR's aim at your DPI

imoRR's Counter-Strike 2 sensitivity of 2.2 at 400 DPI moves 47.2 cm for a full turn. Enter your DPI and the result keeps that same distance.

Enter a DPI from 50 to 32,000.

Copy imoRR's setup

  1. Set the mouse to 400 DPI in the mouse software. Counter-Strike 2 does not change DPI.
  2. Set Counter-Strike 2 sensitivity to 2.2.
  3. The recorded eDPI for this setup is 880.
  4. Set the Counter-Strike 2 resolution to 1280×960.
  5. Import this crosshair code, which CS2 will accept: CSGO-nf6iu-uvGc8-Gvnob-G57zr-nTyjN. The code on file (CSGO-Wqzjm-RGisS-7JbPX-xGc2h-4ZfOQ) is from before September 22, 2026, and the game rejects it.
  6. The verified gear on file is Zowie EC2-A, HyperX Alloy FPS, Zowie XL2540, HyperX Cloud II.

Setup & cohort breakdown

imoRR's Counter-Strike 2 sensitivity & eDPI analysis

400 DPI and 2.2 sensitivity. Recorded eDPI is 880. A full turn takes 47.2 cm (18.6 in). This setup run 10% faster than the 800 eDPI pro median across 1,346 tracked Counter-Strike 2 players with aim data.

Zowie EC2-A among Counter-Strike 2 pros

25 of 1,329 tracked Counter-Strike 2 pros with a recorded mouse (2%) use the Zowie EC2-A.

Common questions

What sensitivity does imoRR use in Counter-Strike 2?
imoRR uses 2.2 sensitivity at 400 DPI.
What DPI does imoRR use?
imoRR's DPI is 400.
What is imoRR's eDPI?
imoRR's eDPI is 880, which is DPI times sensitivity.
What resolution does imoRR play at?
imoRR plays at 1280×960.
What crosshair does imoRR use?
The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 3px long, 0px thick, gap 0. The old gap crossed the center, so the new gap starts at 0. Paste CSGO-nf6iu-uvGc8-Gvnob-G57zr-nTyjN. The stored code CSGO-Wqzjm-RGisS-7JbPX-xGc2h-4ZfOQ is rejected.
What mouse does imoRR use?
imoRR uses the Zowie EC2-A.
What team does imoRR play for?
imoRR plays for Eternal Fire.

Settings export

.cfg
CrosshairCSGO-Wqzjm-RGisS-7JbPX-xGc2h-4ZfOQ
AutoexecIncludes sensitivity, crosshair and 6 viewmodel commands
// imoRR (Eternal Fire) - Counter-Strike 2 autoexec// Generated by ConfigHub.gg: https://confighub.gg/cs2/imorr// Settings last updated Oct 28, 2026//// Install: save this file to Steam/steamapps/common/Counter-Strike Global Offensive/game/csgo/cfg/// Launch option: +exec imorr_autoexec// Mouse DPI: 400 (set in your mouse software, not in-game)// Resolution: 1280x960 (set in the video settings menu) // Mousesensitivity "2.2" // Crosshairapply_crosshair_code "CSGO-Wqzjm-RGisS-7JbPX-xGc2h-4ZfOQ" // Viewmodelviewmodel_fov "60"viewmodel_offset_x "2.5"viewmodel_offset_y "0"viewmodel_offset_z "-1.5"viewmodel_presetpos "0"viewmodel_recoil "0" echo "[ConfigHub] imoRR autoexec loaded"host_writeconfig 

imoRR's sens in other games

47.2 cm/360°
  • Valorant

    0.691

  • Apex Legends

    2.2

  • Fortnite

    8.71%

  • Overwatch 2

    7.33

Same 400 DPI, matched by cm/360. Open the converter

Verified setting history

  • Crosshair CSGO-kb7Ek-vcpOU-xowpE-68JOr-piMHA→CSGO-Wqzjm-RGisS-7JbPX-xGc2h-4ZfOQ

    Nightbot !crosshair
  • Viewmodel —→viewmodel_fov 60; viewmodel_offset_x 2.5; viewmodel_offset_y 0; viewmodel_offset_z -1.5; viewmodel_presetpos 0; viewmodel_recoil 0

    Nightbot !viewmodel