
Counter-Strike 2Updated Sw1ft Counter-Strike 2 settings, crosshair and config
Free agent · Rifler
Last verified
Sources: Liquipedia: player infoboxLiquipedia: Mouse settings tableDPI × sensitivityLiquipedia: Hardware tableLiquipedia: Crosshair table
Crosshair
Sw1ft's crosshair, ready to import
The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 3px long, 1px thick, gap 0. The old gap crossed the center, so the new gap starts at 0.
CSGO-Rrt6u-s6xPb-LuFno-BFxfD-OSViAMouse & video settings
- DPI
- 800
- Sensitivity
- 1.48
- eDPI
- 1,184
- Resolution
- 1280×960
Match Sw1ft's aim at your DPI
Sw1ft's Counter-Strike 2 sensitivity of 1.48 at 800 DPI moves 35.1 cm for a full turn. Enter your DPI and the result keeps that same distance.
Enter a DPI from 50 to 32,000.
Copy Sw1ft's setup
- Set the mouse to 800 DPI in the mouse software. Counter-Strike 2 does not change DPI.
- Set Counter-Strike 2 sensitivity to 1.48.
- The recorded eDPI for this setup is 1,184.
- Set the Counter-Strike 2 resolution to 1280×960.
- Import this crosshair code, which CS2 will accept: CSGO-Rrt6u-s6xPb-LuFno-BFxfD-OSViA. The code on file (CSGO-nDcr2-dTphY-K55MZ-QiwNx-AR3ED) is from before September 22, 2026, and the game rejects it.
- The verified gear on file is Razer DeathAdder V3 Pro, Razer Huntsman, Zowie XL2411P, Logitech G Pro X, Dornfinger Gleitmatte.
Setup & cohort breakdown
Sw1ft's Counter-Strike 2 sensitivity & eDPI analysis
800 DPI and 1.48 sensitivity. Recorded eDPI is 1,184. A full turn takes 35.1 cm (13.8 in). This setup run 48% faster than the 800 eDPI pro median across 1,346 tracked Counter-Strike 2 players with aim data.
Razer DeathAdder V3 Pro among Counter-Strike 2 pros
47 of 1,329 tracked Counter-Strike 2 pros with a recorded mouse (4%) use the Razer DeathAdder V3 Pro.
Common questions
- What sensitivity does Sw1ft use in Counter-Strike 2?
- Sw1ft uses 1.48 sensitivity at 800 DPI.
- What DPI does Sw1ft use?
- Sw1ft's DPI is 800.
- What is Sw1ft's eDPI?
- Sw1ft's eDPI is 1,184, which is DPI times sensitivity.
- What resolution does Sw1ft play at?
- Sw1ft plays at 1280×960.
- What crosshair does Sw1ft use?
- The stored code is from before September 22, 2026, so CS2 rejects it. At 1280×960 it becomes a static cross, 3px long, 1px thick, gap 0. The old gap crossed the center, so the new gap starts at 0. Paste CSGO-Rrt6u-s6xPb-LuFno-BFxfD-OSViA. The stored code CSGO-nDcr2-dTphY-K55MZ-QiwNx-AR3ED is rejected.
- What mouse does Sw1ft use?
- Sw1ft uses the Razer DeathAdder V3 Pro.
Settings export
CSGO-nDcr2-dTphY-K55MZ-QiwNx-AR3ED// Sw1ft - Counter-Strike 2 autoexec// Generated by ConfigHub.gg: https://confighub.gg/cs2/sw1ft// Settings last updated Oct 1, 2026//// Install: save this file to Steam/steamapps/common/Counter-Strike Global Offensive/game/csgo/cfg/// Launch option: +exec sw1ft_autoexec// Mouse DPI: 800 (set in your mouse software, not in-game)// Resolution: 1280x960 (set in the video settings menu) // Mousesensitivity "1.48" // Crosshairapply_crosshair_code "CSGO-nDcr2-dTphY-K55MZ-QiwNx-AR3ED" echo "[ConfigHub] Sw1ft autoexec loaded"host_writeconfig
Sw1ft's sens in other games
Valorant
0.465
Apex Legends
1.48
Fortnite
5.86%
Overwatch 2
4.93
Same 800 DPI, matched by cm/360. Open the converter
Sw1ft's gear
Affiliate linksRazer DeathAdder V3 Pro · Razer Huntsman · Dornfinger Gleitmatte
As an Amazon Associate, ConfigHub.gg earns from qualifying purchases.
Apex Legends